Indoor Spotlights
Lumination's indoor spotlight range covers recessed downlights, surface-mounted spotlights and track systems for directional, adjustable ceiling-level lighting. Every fitting is listed with beam angle, lumen output, colour temperature and lamp type. Brands include Saxby, Endon and Bravo Lighting, covering GU10 and integrated LED formats across fire-rated, tilt-adjustable and fixed designs.
-
Austin Bar 2 Light - Black -
Austin Bar 2 Light - White -
Austin Bar 3 Light - Antique -
Austin Bar 3 Light - Black -
Austin Bar 3 Light - Satin Nickel -
Austin Bar 3 Light - White -
Austin Bar 4 Light - Antique -
Austin Bar 4 Light - Black -
Austin Bar 4 Light - Satin Nickel -
Austin Bar 6 Light - Antique -
Austin Bar 6 Light - Black -
Austin Bar 6 Light - Satin Nickel -
Austin Bar 6 Light - White -
Axial CCT 10.5W Round 10.5W -
Axial CCT 10.5W Round 10.5W-1 -
Axial CCT 15W Round 15W -
Axial CCT 30W Round 30W -
Axial CCT 30W Round 30W-1 -
Axial rectangular 35W -
Broadway 1lt Spotlight matt black with black ribbed sleeve -
Broadway 1lt Spotlight Matt Black with brass sleeve -
Broadway 1lt Spotlight Matt Black with satin brass sleeve -
Broadway 2lt Spotlight Matt Black with black ribbed sleeve -
Broadway 2lt Spotlight Matt Black with polished nickel sleeve
Showing 48 of 218 pieces
Frequently Asked Questions
A recessed spotlight is installed by cutting a hole in the ceiling and fitting the unit into the void above, so only the bezel or trim ring is visible below the ceiling surface. This gives a flush, clean appearance and suits modern plastered ceilings and plasterboard. A surface-mounted spotlight sits on top of the ceiling surface on a round or square backplate, with no ceiling void required. Surface-mounted options suit solid concrete ceilings, older properties where cutting ceiling joists is not practical, or rooms where the flexibility of a movable or adjustable fitting is preferred. Lumination stocks both recessed and surface-mounted LED spotlights from Saxby, Endon and Bravo Lighting, with installation method confirmed on each product page.
For recessed downlights used as general ambient ceiling lighting, a spacing of 1 to 1.5 m between spotlights in a grid formation gives even light distribution across the room. Position the outermost row of spotlights 0.5 to 0.75 m from the wall to wash the wall surface and avoid dark edges. For accent spotlights used to highlight artwork or architectural features, position the fitting 0.6 to 0.9 m from the wall and angle the beam toward the target at 30 to 35 degrees from vertical. Lumination's team at the Taunton and Wellington showrooms advises on spotlight spacing plans regularly and can provide guidance for specific room dimensions and ceiling heights. Free delivery applies to all spotlight orders over £75.
A 36 to 45 degree beam angle is the most versatile choice for general ceiling-level spotlight use, providing adequate spread from a standard 2.4 m ceiling height without the flat uniformity of very wide beams. For accent and picture lighting, choose a narrower beam of 15 to 25 degrees to concentrate the light on a specific surface or object. For very wide rooms where spotlights are the only ceiling light source, a wider beam of 60 degrees gives better room coverage per fitting and reduces the number of fittings required. Beam angle combines with mounting height to determine the diameter of the light pool on the floor or work surface: a 36-degree beam from 2.4 m height produces a pool approximately 1.5 m in diameter. Lumination lists beam angle on every spotlight product page.
Yes, provided the fitting carries the correct IP rating for the bathroom zone. For Zone 2 (within 60 cm of a bath, shower or basin), a spotlight rated IP44 is required. For Zone 1 directly above a bath or shower, IP65 is the minimum. Most decorative indoor spotlights carry IP20 ratings and must not be installed in bathroom zones. Lumination stocks IP44 and IP65 recessed downlights specifically for bathroom installation in the bathroom ceiling lights range. Saxby produces particularly strong IP65 recessed downlights for shower zone use. Always confirm the IP rating before purchasing a spotlight for any bathroom position, as this is a UK building regulation requirement under BS 7671.
Lumination stocks indoor spotlights from Saxby, Endon and Bravo Lighting. Saxby produces the most specification-led spotlight range, covering GU10 and integrated LED recessed downlights with fire-rated and non-fire-rated options, adjustable tilt downlights and track systems in multiple finishes. Bravo Lighting offers integrated LED downlights and surface spotlights at competitive prices. Endon covers decorative and contemporary spotlight options including adjustable surface-mounted heads and bar spotlights. Lumination has been selecting spotlight products from specialist manufacturers for residential and commercial installations for more than 25 years. With 1,797 or more Google reviews at 4.8 stars, our customers confirm the quality and specification accuracy of these products.