Outdoor Wall lights

Lumination's outdoor wall lights cover traditional lanterns, contemporary flat-back wall fittings, flush porch lights and PIR sensor outdoor wall lights. Every fitting carries at least IP44, with IP65 options throughout the range for exposed positions. Brands include Saxby, Elstead and Endon in finishes including black, anthracite, bronze, brushed silver and stainless steel.

Skip to results list
Category
Price
to
The highest price is £1,800.00
Clear
Lighting Type
550 items

Filter

Category
Price
to
The highest price is £1,800.00
Lighting Type

Showing 24 of 550 pieces

Outdoor Wall Lights for Front Doors, Porches and Garden Walls

Outdoor wall lights are the most versatile exterior light fitting. They can be used to flank a front door, illuminate a porch canopy, mark a garden gate, light a path edge or provide security-level illumination of a driveway. The right outdoor wall light depends on three factors: the style of the property, the lumen output required and whether a sensor is needed. For a front door, one fitting to each side of the door at 2 m from ground level gives balanced, symmetrical illumination. For a single-side position, mount at the leading edge of the door frame so the light casts across the door surface.

Browse related categories: porch lights for entrance-specific styles, PIR sensor wall lights for motion-activated security options, and all outdoor lights for the full exterior range. Brands Saxby, Elstead and Endon all produce strong outdoor wall light ranges.

Traditional vs Contemporary Outdoor Wall Lights

Traditional outdoor wall lights from Elstead use lantern-form designs in black iron, bronze and aged brass with tapered glass panels. These suit Victorian, Georgian, Edwardian and country-style properties where the outdoor fitting needs to reference the architectural period. Contemporary outdoor wall lights from Saxby and Endon use flat rectangular profiles, extruded aluminium bodies and up-down LED modules in anthracite, dark bronze and silver grey finishes, suited to modern rendered, brick and cladded exteriors.

Outdoor Wall Light IP Ratings and UK Weather

UK outdoor wall lights experience rain, frost, salt air (in coastal areas) and UV exposure throughout the year. IP65 is the minimum recommended standard for any outdoor wall light in an exposed position, providing protection against water jets from any direction. For coastal properties with salt air exposure, marine-grade stainless steel fittings or corrosion-resistant powder-coated aluminium are recommended. Lumination's Taunton showroom is 35 miles from the Somerset coast and the team advises coastal customers on material selection regularly. For covered porch positions sheltered from direct rain, IP44 is technically acceptable, but IP65 is still the safer choice at minimal extra cost.

Frequently Asked Questions

Outdoor wall lights beside a front door should be mounted with the centre of the fitting at approximately 2 m from ground level, or at a height slightly below the top of the door frame. This positions the light so it illuminates the door and step area without glaring directly into visitors' eyes. For porch canopy lighting, a flush ceiling fitting above the door or a pair of wall lights at 2 m either side gives even coverage. For garden wall lights used as path or border lighting, a lower mounting height of 1.2 to 1.5 m creates softer ambient light at pathway level. Lumination's team at the Taunton and Wellington showrooms advises on outdoor wall light positioning for a wide range of property types and exterior schemes. Free delivery applies to all outdoor light orders over £75.
For outdoor wall lights in exposed positions including open garden walls, gate posts and driveway areas, IP65 is the recommended standard. IP65 provides protection against low-pressure water jets from any direction, including rain from above and wind-driven rain from the sides. For outdoor wall lights in covered porch positions sheltered from direct weather, IP44 provides splash resistance that is technically adequate, though Lumination always recommends IP65 for all outdoor positions as a practical safety margin. The cost difference between an IP44 and IP65 outdoor wall light is usually modest, and using IP65 as standard eliminates the need to assess shelter levels at each installation point. All Lumination outdoor wall lights carry confirmed IP ratings on each product page.
The size of an outdoor wall light should be proportionate to the scale of the property and the doorway or surface it flanks. For a standard front door of 80 to 90 cm width, a wall lantern of 15 to 25 cm width suits the proportion. For a larger double front door or a property with a tall entrance porch, a lantern of 25 to 40 cm width is proportionate. The fitting should not project more than 30 cm from the wall in a position where pedestrians pass close by. Lumination lists the width, height and projection distance of every outdoor wall light on the product page, and with 1,797 or more Google reviews at 4.8 stars, customers confirm these specifications for real installation planning.
Yes. Many outdoor wall lights in Lumination's range are available with integrated PIR (passive infrared) motion sensors that activate the light when movement is detected within the sensor range, typically 8 to 12 m. PIR outdoor wall lights are available in the same lantern, contemporary and flush styles as non-sensor fittings. They are suitable for front doors, garage approaches and driveways where a light that activates on approach is preferred over a constant-on fitting. PIR sensitivity, detection range and time-on duration can usually be adjusted via a small dial on the sensor head. Browse the dedicated PIR outdoor motion sensor wall light range for sensor-specific options. Saxby produces a particularly reliable PIR outdoor wall light range with tested sensor performance.
Lumination stocks outdoor wall lights across three main style families. Traditional lanterns from Elstead use tapered glass panels in black iron, bronze and aged brass finishes, suited to period and country properties. Contemporary outdoor wall lights from Saxby use flat rectangular and square profiles in anthracite, dark bronze and silver grey suited to modern new-build exteriors. Endon offers outdoor wall lights that bridge the gap between traditional and contemporary, with softer geometric forms in mixed finishes. PIR sensor versions are available across all three style families. Lumination has been supplying outdoor wall lights to UK homeowners for more than 25 years and the team at the Taunton and Wellington showrooms displays outdoor fittings and can advise on style, size and IP rating for any property type.
FREE SHIPPING

FREE SHIPPING

on orders over £75

2 Showrooms

2 Showrooms

See Our Stock In Person

We Offer a 14-Day

We Offer a 14-Day

Return Policy

4.8 Star

4.8 Star

Reviewed On Google

SSL

SSL

Encrypted Payments